Home > Article > Content

How do I adjust the hydraulic pressure on a used shovel loader?

Dec 31, 2025

Adjusting the hydraulic pressure on a used shovel loader is a crucial maintenance task that can significantly impact the machine's performance and longevity. As a supplier of Used Shovel Loaders, I've encountered various scenarios where proper hydraulic pressure adjustment was key to getting these machines back in top - notch working condition. In this blog, I'll share my insights on how to adjust the hydraulic pressure on a used shovel loader.

Understanding the Hydraulic System in a Shovel Loader

Before delving into the adjustment process, it's essential to understand the basic components of the hydraulic system in a shovel loader. The hydraulic system consists of a hydraulic pump, valves, cylinders, and hydraulic fluid. The pump is responsible for generating the pressure, which is then directed through valves to the cylinders that control the movement of the loader's arms, bucket, and other attachments.

Used Bulldozers high quality1733280564351(001)

The hydraulic fluid acts as the medium through which power is transmitted. It needs to be clean and at the right level to ensure smooth operation. Over time, in a used shovel loader, the hydraulic fluid may become contaminated, and the components may wear out, affecting the pressure.

Tools Required for Hydraulic Pressure Adjustment

To adjust the hydraulic pressure on a used shovel loader, you'll need the following tools:

  1. Pressure gauge: This is used to measure the hydraulic pressure accurately. Make sure it has a suitable range for the specific shovel loader you're working on.
  2. Wrenches: Different sizes of wrenches are required to access and adjust the pressure - regulating valves.
  3. Safety equipment: Gloves and safety glasses are essential to protect yourself from hydraulic fluid and any moving parts.

Step - by - Step Guide to Adjusting Hydraulic Pressure

Step 1: Preparation

  • First, park the shovel loader on a level surface and engage the parking brake. This ensures the machine is stable during the adjustment process.
  • Turn off the engine and let the hydraulic system cool down. Hydraulic fluid can reach high temperatures during operation, and working on a hot system can be dangerous.
  • Check the hydraulic fluid level. If it's low, refill it with the recommended type of hydraulic fluid. Refer to the machine's manual for the correct fluid specification.

Step 2: Locate the Pressure - Regulating Valves

The pressure - regulating valves are usually located near the hydraulic pump or on the control valve block. Consult the shovel loader's manual to find their exact location. These valves control the maximum pressure in the hydraulic system.

Step 3: Connect the Pressure Gauge

  • Connect the pressure gauge to the test port on the hydraulic system. This port is specifically designed for pressure testing. Make sure the connection is tight to prevent any fluid leakage.
  • Start the engine and let it idle. This allows the hydraulic pump to start generating pressure.

Step 4: Measure the Current Pressure

  • With the engine running at idle, observe the pressure gauge reading. Compare this reading with the recommended pressure specified in the machine's manual. If the pressure is too high or too low, adjustment is required.

Step 5: Adjust the Pressure

  • To increase the pressure, use a wrench to turn the adjustment screw on the pressure - regulating valve clockwise. Make small adjustments and re - check the pressure after each turn.
  • To decrease the pressure, turn the adjustment screw counter - clockwise. Again, make small adjustments and monitor the pressure gauge.
  • Keep adjusting the pressure until it reaches the recommended level. It's important not to over - adjust, as this can cause damage to the hydraulic components.

Step 6: Test the System

  • After adjusting the pressure, test the shovel loader's functions. Operate the loader's arms, bucket, and other attachments to ensure they are working smoothly.
  • Check for any signs of leaks or abnormal noises. If you notice any issues, stop the machine immediately and re - check the pressure adjustment.

Common Issues and Troubleshooting

Even after adjusting the hydraulic pressure, you may encounter some issues. Here are some common problems and their possible solutions:

  • Low pressure: If the pressure remains low after adjustment, there could be a leak in the hydraulic system. Inspect all the hoses, fittings, and connections for signs of fluid leakage. Replace any damaged components.
  • High pressure: High pressure can cause excessive wear on the hydraulic components. Check if the adjustment screw was over - tightened. Loosen it slightly and re - measure the pressure.
  • Erratic pressure: This could be due to a faulty pressure - regulating valve or a problem with the hydraulic pump. In this case, it may be necessary to have the valve or pump inspected and repaired by a professional.

Importance of Regular Maintenance

Regular maintenance of the hydraulic system, including pressure adjustment, is vital for the optimal performance of a used shovel loader. Properly adjusted hydraulic pressure ensures efficient operation, reduces wear and tear on the components, and extends the machine's lifespan.

As a Used Shovel Loader supplier, I recommend that customers schedule regular maintenance checks. This includes checking the hydraulic fluid level, changing the fluid at the recommended intervals, and inspecting the hoses and valves for any signs of damage.

Other Used Construction Machinery

In addition to used shovel loaders, we also offer a wide range of other used construction machinery, such as Used Excavating Machinery, Used Bulldozers, and Second - hand Crane. These machines are thoroughly inspected and refurbished to ensure they meet high - quality standards.

Contact for Purchase and Consultation

If you're in the market for a used shovel loader or any other used construction machinery, we're here to assist you. Our team of experts can provide detailed information about the machines, including their specifications, maintenance history, and performance. We can also offer guidance on hydraulic pressure adjustment and other maintenance tasks.

Feel free to reach out to us to start a conversation about your construction machinery needs. Whether you're a small contractor or a large construction company, we have the right equipment to fit your requirements.

References

  • Manufacturer's manuals for used shovel loaders.
  • Hydraulic system maintenance guides.
  • Industry standards for hydraulic pressure adjustment in construction machinery.
Send Inquiry
David Li
David Li
As the Chief Technology Officer at Hengtong Group, I focus on developing innovative technologies for the transportation industry. With over 8 years of experience in trailer manufacturing and technology integration, I drive our commitment to excellence and sustainability.
Contact Us