Home > Article > Content

What is the hydraulic pump flow rate of used Sany excavators?

Jun 03, 2025

Hey there! As a supplier of Used Sany Excavator, I often get asked about the hydraulic pump flow rate of used Sany excavators. So, I thought I'd write this blog to shed some light on this topic.

17333014529241733301841902

First off, let's understand what the hydraulic pump flow rate means. In simple terms, the hydraulic pump flow rate is the volume of hydraulic fluid that the pump can deliver per unit of time, usually measured in liters per minute (LPM) or gallons per minute (GPM). This flow rate is crucial because it directly affects the performance of the excavator. A higher flow rate generally means faster movement of the excavator's boom, arm, and bucket, allowing for more efficient digging and material handling.

Now, when it comes to used Sany excavators, the hydraulic pump flow rate can vary depending on several factors. One of the main factors is the model of the excavator. Sany offers a wide range of excavator models, each designed for different applications and performance requirements. For example, smaller Sany excavators, like the SY16C or SY35U, are typically used for light - duty tasks such as landscaping and small - scale construction. These models usually have relatively lower hydraulic pump flow rates, perhaps in the range of 20 - 40 LPM.

On the other hand, larger Sany excavators, such as the SY215C or SY365C, are built for heavy - duty mining and large - scale construction projects. These machines need a higher hydraulic pump flow rate to power their larger and more powerful attachments. The hydraulic pump flow rate of these larger models can be anywhere from 100 - 200 LPM or even higher, depending on the specific configuration.

Another factor that can influence the hydraulic pump flow rate of a used Sany excavator is its age and usage history. Over time, the internal components of the hydraulic pump can wear out. Seals may start to leak, and the pump's efficiency may decrease. An excavator that has been used extensively in harsh working conditions, like in a mine with a lot of dust and debris, is likely to have a lower hydraulic pump flow rate compared to one that has been used more gently in a well - maintained construction site.

When buying a used Sany excavator, it's essential to check the hydraulic pump flow rate. You can do this through a simple test. First, make sure the excavator is in good working condition and the hydraulic fluid is at the correct level. Then, use a flow meter to measure the flow rate of the hydraulic fluid coming out of the pump. Compare the measured flow rate with the specifications provided by Sany for that particular model. If the measured flow rate is significantly lower than the specified value, it could indicate a problem with the hydraulic pump.

There are also some signs that can tell you if the hydraulic pump flow rate is not right. For instance, if the excavator's movements seem sluggish, like the boom takes a long time to lift or the bucket moves slowly, it could be due to a low hydraulic pump flow rate. Another sign is excessive heat in the hydraulic system. When the pump is not delivering the right amount of fluid, the system has to work harder, which can generate more heat.

As a supplier of used Sany excavators, I always make sure to thoroughly inspect the hydraulic system of each machine before putting it up for sale. We check the hydraulic pump flow rate, as well as the condition of the hoses, valves, and other components. If there are any issues with the hydraulic pump, we either repair or replace it to ensure that the excavator is in top - notch condition.

If you're in the market for a used Sany excavator, don't just focus on the price or the overall appearance of the machine. The hydraulic pump flow rate is a key factor that can greatly affect the performance and productivity of the excavator. A machine with a proper hydraulic pump flow rate will be able to get the job done faster and more efficiently, saving you both time and money in the long run.

I understand that choosing the right used Sany excavator can be a bit overwhelming, especially when considering the hydraulic pump flow rate. But don't worry! Our team of experts is here to help you. We can provide you with all the information you need about the hydraulic pump flow rate of each used Sany excavator in our inventory. We can also give you advice on which model is best suited for your specific application.

So, if you're interested in purchasing a used Sany excavator, whether it's for a small - scale project or a large - scale construction job, get in touch with us. We're more than happy to discuss your requirements and show you the available options. Let's work together to find the perfect used Sany excavator that meets your needs and budget.

References:

  • Sany Excavator Technical Manuals
  • Industry - wide knowledge on hydraulic systems in construction machinery
Send Inquiry
Amanda Zhang
Amanda Zhang
I am the Data Analytics Specialist at Hengtong Group, where I leverage data to drive business decisions and improve operational efficiency. My expertise lies in analyzing market trends and optimizing our global supply chain.
Contact Us