Technical Specification Guide
I. Classification by Structural Design
| Type | Key Features | ISO Standard |
|---|---|---|
| 1. Articulated Dump | - 3-section monocoque chassis with oscillating joint (30° articulation) - 45-80 ton payload capacity |
ISO 21873-1:2017 |
| 2. Rear-Tip Trailer | - Hydraulic telescopic cylinders (2-stage 320mm bore) - 60°±3 tipping angle |
EN 13094:2015 |
| 3. Side-Dump System | - Dual 180° rotating arms with load balance sensors - 8-12 sec discharge cycle |
AS 4247-2020 |
| 4. Bottom Discharge | - Segmented gates with progressive opening (0-100% flow control) - 150m³/hr discharge rate |
ASTM D6356-17 |
| 5. Mining Spec | - Reinforced Hardox 500 floors (10mm thickness) - 100+ ton GVM configurations |
ISO 19296:2018 |
II. Technical Parameter Matrix
| Parameter | Articulated | Rear-Tip | Side-Dump | Bottom Discharge | Mining |
|---|---|---|---|---|---|
| Typical Capacity | 45-80t | 20-50t | 15-35t | 30-60t | 80-200t |
| Discharge Time | 25-40s | 15-25s | 8-12s | Continuous | 30-60s |
| Ground Clearance | 500mm | 350mm | 400mm | 300mm | 600mm |
| Turning Radius | 9m | 12m | 7m | 14m | 15m |
| Hydraulic Pressure | 250 bar | 220 bar | 200 bar | 180 bar | 300 bar |
III. Application Scenarios
1. Construction Sector
Roadworks: Rear-tip trailers for asphalt (150-180℃ thermal insulation lining)
Demolition: Side-dump models with debris containment nets (EN 12662 compliant)
Tunneling: Articulated units with FOPS/ROPS certification (ISO 3449 Level II)
2. Mining Operations
Coal Handling: Bottom discharge trailers (explosion-proof electrical system)
Ore Transport: Mining spec with Kress 1200kw powerpack (IP68 hydraulic components)
3. Agricultural Use
Grain Transport: Aerated bottom discharge (0.5m³/s airflow system)
Manure Handling: Acid-resistant SS304 sideboards (1.5mm rubber lining)
4. Port Logistics
Bulk Cargo: Articulated units with RFID container tracking system
Intermodal: Retractable gooseneck for rail/road transfer (AAR M-947 certified)
Specialized Configurations
Arctic Package: Hydraulic oil preheater (-45℃ operation)
Desert Edition: Sand filtration system (10μ particle rating)
HAZMAT Version: Vapour-tight seals + grounding system (ADR 2019 Class 8)
Certification Requirements
| Market | Mandatory Standards | Test Items |
|---|---|---|
| European Union | EN 13094 + Machinery Directive 2006/42/EC | Lateral stability (35° tilt test) |
| North America | FMVSS 223 + OSHA 1926.602 | Brake fade (7% grade 10 cycles) |
| Australia | ADR 82/00 + LVR Class 3 | Load shift (0.5g lateral force) |
| Middle East | GCC Standard 1433-2018 | Heat resistance (60℃ ambient test) |
