Parameter List
|
Details |
Specification(for reference) |
|
1.Overall parameters |
|
|
Total length (including refrigerator) |
13600mm |
|
Total width |
2500mm |
|
Total height |
4000mm |
|
Internal length |
13425mm |
|
Internal width |
2330mm |
|
Internal height |
3000mm |
|
Internal volume |
78m³ |
|
Refrigerator model and accessories |
Carrier 7300 |
|
2.Foam layer thickness |
|
|
Front wall |
100mm |
|
Side plate |
75mm |
|
Roof |
80mm |
|
Floor |
64mm |
|
Door plank |
76mm |
|
3.Car body configuration |
|
|
Front wall outer plate |
Precoated white aluminum plate |
|
Outer plate |
Precoated white aluminum plate |
|
Outer roof |
Whole smooth aluminum plate |
|
Outer door panel |
Precoated white aluminum plate |
|
Front wall inner plate |
Food grade thermoplastic board |
|
Inner side plate |
Food grade thermoplastic board |
|
Inner roof |
Food grade thermoplastic board |
|
Inner door lining |
Food grade thermoplastic board |
|
Sub floor |
Food grade thermoplastic board |
|
Wear plate |
Aluminum profile wear plate is about 280mm high |
|
Side panel air guide |
The inner side panel is provided with a submerged vertical air guide slot |
|
Floor form |
Reinforced air guide aluminum alloy floor,with ventilation holes on t floors on both sides (Castle Floor) |
|
Bottom beam |
High strength I-beam |
|
Floor stiffener |
compound material |
|
Back door type |
Opposite door |
|
Rear door hinge |
Aluminum alloy profile hinge |
|
Number of locking rods |
Galvanized locking rod,2 for each door,4 in total |
|
Rear door frame |
stainless steel |
|
Door anti-collision block |
one on the left and one on the right |
|
Rear door handle |
Left door mounting handle |
|
Water leakage device |
Two sets at the front and rear,with rubber nozzles |
|
Side door |
have |
|
4.Traveling mechanism and light line |
|
|
Lower frame |
Frame frame with girder |
|
Traction pin plate |
Box design |
|
Traction pin |
50# Traction pin KZ1008 |
|
Outrigger |
Jost 28T linkage Outrigger |
|
Suspension |
Three axis mechanical suspension |
|
Axle |
BPW/FUWA/SAF/HT 13T axle |
|
Braking form |
drum brake |
|
Tyre |
12 tubeless vacuum tires |
|
Rim |
12 sets of carbon steel rims |
|
ABS |
With |
|
lamps and lanterns |
24V LED lamps |
|
Spare wheel carrier |
2 sets |
|
spare tire |
1 sets |
|
5.other |
|
|
Interior ceiling lamp |
One in front,one in the middle and one in the rear of three LED interior ceiling lamps |
|
Side door |
Right side double opening,(2400 * 2400,the specific position is based on the technical design) |
|
hold-all |
1 aluminum,installed on the left |
|
Front wall ventilation (door / window) |
There is one,one on the left and one on the right |
|
Rear door ventilator and accessories (lower right) |
There is one. It is installed at the right rear door. The height from the floor:it is designed as low as possible |
|
Improvement of cooling air circulation in compartment |
Ventilation slot with inner side panel |
|
The rear door is lined with ventilation panel stiffeners (holes are punched on the front and side of the stiffeners) |
|
|
On board tools |
Spare wheel crank,axle head nut,sleeve, pry bar |
Refrigerated semi trailers are specialized temperature-controlled transport vehicles designed for the safe transportation of perishable goods. Constructed with high-strength Q345B steel frame and 80-100mm polyurethane foam insulation, these trailers maintain precise temperature ranges from -30°C to +25°C. Equipped with advanced refrigeration units (Carrier/Thermo King), they feature multi-temperature zone control (2-3 zones optional) with ±1°C temperature stability. Standard dimensions include 12.2m (40ft), 13.7m (45ft), and 16.2m (53ft) lengths, with 2.5m width and 2.8-3.0m height, offering 30-65 m³ cargo volume and 25-45 ton payload capacity. The trailers are fitted with BPW/FUWA axles, air suspension, 12R22.5 tubeless tires, and WABCO EBS braking system. Key safety features include GPS temperature monitoring, door sensors, emergency stop buttons, and pressure relief valves. Optional configurations include hydraulic lift gates, solar-powered auxiliary units, and remote temperature control via mobile app. Ideal for food logistics (meat, seafood, dairy), pharmaceuticals (vaccines, biologics), and chemical transport, complying with FDA, HACCP, and GDP standards.




Hot Tags: refrigerated semi trailers, China refrigerated semi trailers manufacturers, factory, trailer electrical systems, trailer weights, construction trailer, trailer inspections, trailer distributor, trailer test drives
















