Home > Article > Content

How to install a level indicator on an oil tank trailer?

Jun 24, 2026

Hey there! As an oil tank trailer supplier, I often get asked how to install a level indicator on an oil tank trailer. It's a great question, and in this blog post, I'll walk you through the process step by step.

First off, let's talk about why you'd want a level indicator on your oil tank trailer. It's pretty simple, really. A level indicator helps you keep track of how much oil is in the tank. This is super important for several reasons. You don't want to run out of oil in the middle of a delivery, and you also don't want to overfill the tank, which can be a safety hazard.

Now, before you start the installation, there are a few things you'll need to gather. You'll need the level indicator kit itself, which usually comes with the sensor, the gauge, and all the necessary wiring and mounting hardware. You'll also need some basic tools like a drill, a wrench set, and a screwdriver. Make sure you have everything you need before you begin, so you don't have to stop in the middle of the installation.

Step 1: Choose the Right Location for the Sensor

The first step in installing a level indicator is to choose the right location for the sensor. This is crucial because the sensor needs to be in a place where it can accurately measure the level of the oil in the tank.

Typically, you'll want to install the sensor near the bottom of the tank. This allows it to measure the oil level from the lowest point, giving you the most accurate reading. However, make sure the sensor is not in a position where it can get damaged by the movement of the oil or by any of the internal components of the tank.

Mark the spot where you want to install the sensor on the tank. Use a marker or a piece of tape to make a clear mark. This will help you when you start drilling the hole for the sensor.

Step 2: Drill the Hole for the Sensor

Once you've marked the spot, it's time to drill the hole for the sensor. Make sure you use the right size drill bit for the sensor. The size should be specified in the installation instructions that come with the level indicator kit.

Before you start drilling, put on some safety goggles to protect your eyes from any metal shavings. Drill the hole slowly and carefully, making sure it's straight and clean. After you've drilled the hole, use a file to smooth out any rough edges around the hole.

Step 3: Install the Sensor

Now that you have the hole drilled, it's time to install the sensor. Take the sensor from the kit and insert it into the hole you just drilled. Make sure it fits snugly.

Most sensors come with a gasket to create a seal between the sensor and the tank. Place the gasket around the sensor before inserting it into the hole. This will prevent any oil from leaking out of the tank.

Once the sensor is in place, use the mounting hardware that came with the kit to secure it to the tank. This usually involves using nuts and bolts. Tighten the nuts and bolts using a wrench, but be careful not to overtighten them, as this can damage the sensor or the tank.

Step 4: Connect the Wiring

After the sensor is installed, it's time to connect the wiring. The wiring is what allows the sensor to communicate with the gauge in the cab of the truck.

The level indicator kit should come with a wiring diagram that shows you how to connect the wires correctly. Follow the diagram carefully and make sure you connect the wires to the right terminals.

Use electrical tape to secure the connections and prevent any short circuits. Once you've connected all the wires, make sure they are neatly bundled and secured to the trailer so they don't get in the way or get damaged during operation.

Tamiya Flatbed Trailer factory8 Car Trailer

Step 5: Install the Gauge

The gauge is what you'll use to read the oil level in the tank. It's usually installed in the cab of the truck where the driver can easily see it.

Choose a location in the cab where the gauge can be easily seen and accessed. Mark the spot and drill the necessary holes for the mounting brackets. Install the gauge using the mounting hardware that came with the kit.

Once the gauge is installed, connect the wiring from the sensor to the gauge. Make sure the connections are secure and that the gauges powers up correctly. If the gauge doesn't power up, double - check your wiring connections.

Step 6: Test the Level Indicator

After you've installed the sensor and the gauge and connected all the wiring, it's time to test the level indicator. Fill the tank with a small amount of oil and check the gauge to see if it shows the correct level.

If the gauge doesn't show the correct level, there could be a problem with the sensor installation or the wiring connections. Double - check everything and make sure the sensor is installed correctly and the wiring is connected properly.

If you're still having problems, consult the troubleshooting section in the installation instructions or contact the manufacturer of the level indicator kit for assistance.

Additional Tips

  • Regular Maintenance: Once the level indicator is installed, make sure to perform regular maintenance. Check the wiring for any signs of wear and tear, and make sure the sensor and the gauge are clean.
  • Calibration: Over time, the level indicator may need to be calibrated to ensure accurate readings. Follow the manufacturer's instructions for calibration.
  • Safety First: When working with oil tank trailers, always follow safety procedures. Wear appropriate safety gear, and make sure the trailer is properly grounded to prevent any static electricity buildup.

If you're in the market for an oil tank trailer or other types of trailers like Lowbed Lowboy Trailer, 8 Car Trailer, or Tamiya Flatbed Trailer, we've got you covered. We're a reliable supplier with a wide range of high - quality trailers. If you're interested in purchasing any of our products or have any questions about the installation process or our trailers in general, don't hesitate to reach out for a procurement discussion.

References

  • Manufacturer's installation instructions for the level indicator kit.
  • General safety guidelines for working with oil tank trailers.
Send Inquiry
Ryan Wang
Ryan Wang
As the Product Manager for Trailer Accessories, I ensure that each accessory meets the highest standards of quality and functionality. With a background in automotive engineering, I lead our team in creating innovative and reliable products for the transportation industry.
Contact Us